The best try-squares are now made with graduated blades, Fig. 50, and from two inches to twelve inches in length of blade. Several sizes will be found necessary, as in many cases the blade must be short to admit of its application in pattern work. The adjustable try-square, illustrated in Fig. 51, is not expensive, and will bo found to fill the requirements of several small squares. It is made in two sizes, with graduated blades four inches and six inches in length respectively. The blade of this square can be firmly secured in its seat at any point. When the blade is carried entirely to the front of the handle, it is like an ordinary try-square; and the moving of the blade makes the square equally perfect down to one-quarter-inch length of blade, or even less.

Squares 100150

Fig. 50.

Squares 100151

Fig. 51.

With one adjustable square of this kind, six inches in length, only one 8-inch or one 10-inch ordinary square will be found necessary.

A still more convenient, but slightly more expensive, form of adjustable try square is shown in Fig. 52. It differs from that shown in Fig. 51, in being self-contained, no screw-driver being necessary for moving the blade or securing it in position, and also because the blade can be removed entirely, and an extra blade, shown in Fig. 53, substituted. The ends of this second blade give both the hexagon and octagon angles, which is a matter of great convenience to the pattern maker. Fig. 53 shows the hexagon ■ end of the blade applied. Reverse the blade and the octagon end will be in position for use.

Squares 100152

Fig. 52.

Squares 100153

Fig. 53.

To the above try-squares there should be added a carpenter's steel square 24 inches X 18 inches, for use in laying out and squaring up large stock and large patterns.

Squares 100154UNIVERSAL TRIMMER, SHOWING GRADUATIONS. Oliver Machinery Company.

UNIVERSAL TRIMMER, SHOWING GRADUATIONS. Oliver Machinery Company.