The machine represented in the annexed engravings consists of a movable inductor, whose alternate poles pass in front of an armature composed of a double number of oblong and flat bobbins, that are affixed to a circle firmly connected with the frame. There is a similar circle on each side of the inductor. The armature is stationary, and the wires that start from the bobbins are connected with terminals placed upon a wooden support that surmounts the machine.

GERARD'S ALTERNATING ELECTRIC MACHINE.

This arrangement allows of every possible grouping of the currents according to requirements. Thus, the armature may be divided into two currents, so as to allow of carbons 30 mm. in diameter being burned, or else so as to have four, eight, twelve, twenty-four, or even forty-eight distinct circuits capable of being used altogether or in part.

This machine has been studied with a view of rendering the lamps independent; and there may be produced with it, for example, a voltaic arc of an intensity of from 250 to 600 carcels for the lighting of a courtyard, or it may be used for producing arcs of less intensity for shops, or for supplying incandescent lamps. As each of the circuits is independent, it becomes easy to light or extinguish any one of the lamps at will. Since the conductors are formed of ordinary simple wires, the cost attending the installation of 12 or 24 lamps amounts to just about the same as it would in the case of a single cable.

GERARD'S 250 H.P. DIRECT CONNECTION ALTERNATING CURRENT STEAM DYNAMO-ELECTRIC MACHINE.

One of the annexed cuts represents a Corliss steam engine connected directly with an alternating current machine of the system under consideration. According to the inventor, this machine is capable of supplying 1,000 lamps of a special kind, called "slide lamps," and a larger number of incandescent ones.--Revue Industrielle.