If in need of a drinking cup while camping, a temporary cup can be made of a tomato or baking-powder can. Punch two holes near the top of the can; bend a piece of wire and place the ends through the holes as shown at A in the sketch. Pull the ends to draw the loop close up on the inside of the tin and then twist the ends to form a handle as shown at B. When there is enough wire twisted to form a good handle, pass the ends around the can at the bottom and twist together on the opposite side. --Contributed by W. A. Lane, El Paso, Tex. Handle on a Tin Can

Illustration: Handle on a Tin Can