To lard meat or poultry is to introduce into the surface of the flesh, slips of the fat only of bacon, by means of a larding-pin or larding-needle, it being called by both names. It is a steel instrument about a foot long, sharp at one end, and cleft at the other into four divisions, which are near two inches in length, and resemble tweezers. It can be obtained at the hardware stores.
Cut the bacon into slips about two inches in length, half an inch in breadth, and half an inch in thickness. If intended for poultry, the slips of bacon should not be thicker than a straw. Put them, one at a time, into the cleft or split end of the larding-needle. Give each slip a slight twist, and press it down hard into the needle with your fingers. Then push the needle through the flesh, (avoiding the places where the bones are,) and when you draw it out it will have left behind it the slip of bacon sticking in the surface. Take care to have all the slips of the same size, and arranged in regular rows at. equal distances. Every slip should stand up about an inch. If any are wrong, take them out and do them over again. To lard handsomely and neatly requires practice and dexterity.
Fowls and game are generally larded on the breast only. If cold, they can be done with the fat of cold boiled ham. Larding may be made to look very tastefully on any thing that is not to be cooked afterwards.