Specification No. 5a - Metal Tiling

All rust and scale shall first be removed by scraping, wire brushing, or other effective means. One coat of Sherwin-Williams Galvanized Iron Primer shall then be applied and, when thoroughly dry, followed with two coats of Sherwin-Williams Paint (prepared), in color selected.

Specification No. 6 - Cement, Concrete, And Stucco Finish

First apply a coat of Sherwin-Williams Concrete and Cement Weatherproof Coating, and when thoroughly dry follow with two coats of Sherwin-Williams Concrete and Cement Finish, in color selected by owner or architect. Sufficient time shall be allowed between coats for thorough drying.

Specification No. 6a - Cement And Concrete Floor Finish (Interior Or Exterior)

First apply a coat of Sherwin-Williams Concrete and Cement Weatherproof Coating and, when thoroughly dry, follow with two coats of Sherwin-Williams Concrete and Cement Floor Finish (interior or exterior), in color selected by owner or architect. Sufficient time shall be allowed between coats for thorough drying.

Specification No. 7 - Stained Exterior Finish

First apply one coat of Sherwin-Williams Preservative Shingle Stain, in color selected by owner or architect, thinned to shade desired, and follow with two coats of Sherwin-Williams Pure Boiled Linseed Oil, which shall be thinned 10 per cent. with pure spirits turpentine.

Specification No. 8 - Porch Floors

Apply three coats of Sherwin-Williams Porch Floor Paint, in colors as directed. The goods shall be thinned for use with pure raw linseed oil and pure spirits turpentine in manner approved by architect.

Specification No. 9 - Interior - Mission Finish, On Any Wood

All interior woodwork in the following rooms shall be finished as follows: A coat of Sherwin-Williams Handcraft Stain shall first be applied, in color selected by owner or architect. The stain shall be followed with two coats of Sherwin-Williams Mission-lac, the first coat of which shall be sandpapered with 00 sandpaper and the second coat lightly rubbed to a dull finish with pumice-stone and oil.

Specification No. 10 - Wax Finish, On Any Wood

All interior woodwork in the following rooms shall be finished as follows: First, the bare wood shall receive one coat of Sherwin-Williams Handcraft Stain, color to be selected by owner or architect, and allowed to dry over night. Then apply one coat of Sherwin-Williams Mission-lac, allow time to dry thoroughly, sandpaper to a smooth, dull surface and apply Sherwin-Williams Furniture Wax with a soft cloth, rub off all surplus wax, bringing work to a wax polish.

Specification No. II - Velvet Finish, On Any Wood

All interior woodwork in the following rooms shall be finished as follows: A coat of Sherwin-Williams Handcraft Stain shall first be applied, in color selected by owner or architect. The stain shall be followed with one coat of Sherwin-Williams Mission-lac, lightly sanded with 00 sandpaper. One coat of Sherwin-Williams Velvet Finish Varnish shall then be applied.