Steps

Tools

Order Of Exercise

1. Clamping

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Screwing

2. Draw outline and cut back.

3. Gluing

2. Countersink and bit stock

3. Cut front and glue to sides, base and back.

3. Screw-driver and hand-clamp

4. Screw match-holder to back and sandpaper smooth.

4. 1-8 inch drill

5. 5-8 inch No. 8 screws.

5. Glue on. sandpaper, and shellac.

6. Marking gauge and try-square

7. Block and Jack plane