Figs. 1 and 2 show the ends of two seats different in design for the centre of a shop. Fig. 1 is a double seat, with a footboard 10 in. wide raised 6 in. from the ground. Fig. 2 is a double seat 1 ft. 8in. from seat to ground and 2ft. 4in. wide, with one centre back rail. The seat shown at Fig. 1 is 2 ft. 10 in. wide and 2 ft. 1 in. to the ground, and will be found very useful, as it enables the shopman to fit boots easily, A and B are back rails, and C the top rail. A centre leg will be necessary under the footboard and seat, and cross bearers framed into the longitudinal rails. The footboard may be made movable by framing the rails into the legs of the seat and fixing them by means of a bolt through each leg, tightened up on the inside with a wing nut.

Double Seats for Shop.