Draw a rectangle 6"x2".

Divide into six equal spaces, drawing lines across.

Draw line A, ¼" from top of rectangle, and draw points as shown in drawing. Draw line, B, J" below figure obtaining flap lines for bottom. Draw ¼" flap line at the end. On the base line of one division is rectangle draw arcs 1 and 2 radius equal to line. From the center thus obtained and with same radius draw a circle and on the circumference set off spaces for hexagon. Cut out figure on full lines. Do not cut off the bottom from the line. Score and fold on dashed lines. Paste the model with flaps inside. Draw and cut a circular piece and attach as a base, as shown in sketch. Material: Tagboard or bristolboard.