The accompanying drawing shows a cupboard that will be suitable for holding carpenter's tools. A useful size would be about 2ft. 6 in. wide, 3ft. high, and llin. deep; but the dimensions may be varied according to requirements and number of tools to be stored. One-inch material will be suitable for the sides, bottom, and top, and also for the stiles and rails of the doors. The panels of the doors should be of 1/2-in. stuff, and the back of 5/8-in. thick boarding, grooved and tongued; matchboarding will answer the purpose. The shelves and drawer fronts may be of 3/4-in. stuff, and the sides, back, and bottom of the drawers of 1/2-in. stuff; these are finished sizes. Forms for racks are shown; these can be fixed where desired. The compartment on the left is for planes, etc.

Cupboard for Carpenter's Tools.