This section is from the book "Amateur Work Magazine Vol4". Also available from Amazon: Amateur Work.
The procedure when masking glass negatives is not exactly the same as with films. Take a strip of passe partout binding about three inches longer than the sum of the four sides of the negative. Fasten one end of this strip with a thumb tack to a drawing board, gummed side upwards. Secure the other end in the same manner at such an angle that the strip will be parallel to the perpendicular lines on the image of the negative, when the latter is at the middle of the strip, and others at a distance apart as the sides of the negative require. The whole arrangement is shown at Fig. 3. Moisten the first division or the strip (d a) and with the tee square as a guide, which should be placed in position previons to moistening the strip, lay the negative on the moistened strip. When pressed into place cut off the portion of the strip without disturbing the position of the remainder, and follow the same procedure with the other three sides.
The negative is placed on the moistened strip - in-stead of the strip being placed on the negative - be-cause it is much easier to handle the rigid negative than a piece of moistened paper.
When a black margin is required round a print from a glass negative, the easiest plan is to cut the printing paper about a quarter of an inch larger all around than the part of the negative to be printed. Cut a piece of non-actinic paper the size of the picture. Print from the negative first, and with a piece of paper on the print expose the margin behind a plate of glass in the printing frame.
It is not possible to make a double border on a print from a glass negative without cutting the latter with a diamond.
For temporary masking a glass negative four rubber bands may be used along the four sides. Care must, of course, be exercised on account of their flexibility. Rubber bands, cut like those used on fruit cans, only thinner, may be Used when circular masks are required - "Photographic Times. "
 
Continue to: