This section is from the book "Amateur Work Magazine Vol4". Also available from Amazon: Amateur Work.
Proposed Society Of Model Makers.
The accompanying photographic view and drawings illustrate one of several small models obtained by Mr. Parsell of Parsell & Weed, New York, during a recent visit to England. His collection is a very interesting one, as it includes both single and double vertical and horizontal engines, several types of feed pumps, and other accessions, required for the proper operation of the models, all of which are accurate representations of their large prototypes, so far as mechanical requirements will permit. The engine here illustrated is about 5 in. high and 5 in. long, the drawings showing each piece the full size. All the parts are of brass, except piston rod and shaft, crank shaft and crank. All the work is exceptionally well done, so that the friction of bearing and glands is but little.
The ease with which the crank turns is surprising, and with a proper boiler the engine will undoubtedly develop power enough to drive a 3 1/2 or 4 ft. model steamer, although no tests have been made by Mr. Parsell to ascertain the actual power it will give.
An inspection of the various parts, when taken apart shows nothing in their construction which should be found at all difficult by the mechanic of 01-dinary skill, keeping in mind, of course, the necessity of being accurate with all fits. For this reason the adaptability of such models for construction by amateurs, and especially senior pupils in manual training schools, makes it worthy of their careful attention. Such work is very popular in England, where model enthusiasts are organized into a very popular and beneficial society, known as the "Society of Model Engineers." This society has numerous branches, holds regular meetings and exhibitions at which valuable prizes are offered for models of various kinds. A " Junior Branch " gives suitable opportunity for beginners and the younger class, who have not reached the proficiency and experience of the members of the regular society.
As the educational benefits to be derived from work of this kind are considerable, and contribute directly to practical results of importance, the desirability of increasing the interest in this country is worthy_of attention.
Undoubtedly there are many readers of Amateur Work, who would be glad to take up work of this kind, if assured that designs, castings and the necessary construction information would be forthcoming. Let those who are interested write to the editor and express such interest, adding also any suggestions that may come to mind. If a sufficient number should desire, an "American Society of Model Makers " could be organized, and the editor of this magazine may be counted on to give all the assistance towards making it a success, which lies in his power. Such a society, however, cannot be made of interest and value to its membership, unless those constituting it are willing to attend meetings, canvass for new members, participate in competitions and exhibitions, and do all they can to start the society in a manner which will make it worthy of the attention of capable and ambitious mechanics. If the idea of such work and such a society appeals to you, take the time to write and say so at an early date so that the organization may be started, and the winter devoted to placing it upon a sound and permanent foundation.


 
Continue to: