Yellow Pine - 5 in. x 1 1/4 in. Square.

Tools

Smoothing Plane, Square, Gauge, Gimlet, File, And Knife.

(1). Plane up.*

(2). Square one end with knife and file.

(3). Set out length, running the pencil marks all round the block with the square. (4). Cut to length, and square up the end. (5). Draw diagonals across one end to obtain centre for boring. (6). Bore the file hole 1 inch deep with the gimlet, holding block in left hand, and testing boring with the eye by watching inclination.

(7). Set out for taper by gauging 1/8-inch around bored end, and running lines from the gauge marks to the corners of the top of the block.

(8). Plane off the tapers.

(9). Gauge for bevelling 1/8-inch.

(10). Bevel sides with plane and top edges with knife, and finish.

No. 3. File Handle. (Full size.)

File Handle. (Full size.)

*Note. - The technical term "plane up," means plane side and edge, and width and thickness; e.g., plane up completely.