Wood: Oak.

Preparatory: Make working drawing and stock list. Cut all pieces to required dimensions, making allowance for working.

Exercises.

1. A. Make ends of desired shape and size. Do not waste time in block-planing bottom of ends, as they rest on the floor. B. Same as Ex. 1 B of Fig. 42.

Complete the model by the same exercises and progression as described in Fig. 42. The only important adaptations necessary will be in Ex. 1 E, in which the grooves should be made 5/16" deep. In Ex. 3 F, 7/32" should be made

Ex. 3 G should read: cut from the front and back edge to the tenons with a saw, and cut out the space between the tenons with a frame or turning saw. Begin this cut with a hole made by an auger bit large enough to start the saw.