Twenty-Eighth Week - Model No. 7, (Continued)

Theory (Ten Minutes)

1. Cutting of wood.

2. Use of spokeshave.

Practice

1. Cut to line with spokeshave.

2. Nail stock together.

3. Round edges with spokeshave.

Twenty-Ninth Week - Model No. 7, (Continued)

Theory (Ten Minutes)

1. Moisture in wood.

2. Air drying.

3. Kiln drying.

Practice

Sandpaper and finish model.

Thirtieth Week - Model No. 8

Theory (Ten Minutes)

Shrinkage in wood.

Practice

Plane stock square and true to dimensions.

Thirty-First Week - Model No. 8, (Continued)

Theory

Use of brads.

Practice

1. Finish planing slats.

2. Draw outline of two legs, using knife and marking gauge.

3. Saw and cut to line with chisel.

Thirty-Second Week - Model No. 8, (Continued)

Theory

Sizes of brads.

Practice

1. Sandpaper wood.

2. Nail slats and legs together.

3. Stain and finish.

Thirty-Third Week - Model No. 9

Practice

Saw out stock.

Thirty-Fourth Week - Model No. 9, (Continued)

Practice

Plane pieces to dimensions.

Thirty-Fifth Week - Model No. 9, (Continued)

Practice

1. Saw bevel on back, round edge and smooth, using plane and spokeshave.

2. Cut bevel on sides.

3. Bevel front, and nail pieces together.

Sixth Grade

First Week - Model No. 1

Theory (Ten Minutes)

Uses of bench hook. Why glued together.

Practice

Saw out stock for model.

Second Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Discussion of woods. Birches; sweet birch.

Practice

1. Square stock, plane two large pieces to dimensions.

2. Bore holes for use of screws.

In base piece and rest (upper and lower).

Third Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Discussion of woods. Birches; red birch.

Practice

1. Finish planing larger pieces for base. 2. Glue together, using hand clamps.

Fourth Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Discussion of woods. Birches; white birch.

Practice

1. Plane and square two small pieces to dimensions. 2. Lay out center lines for screws.

Fifth Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Discussion of woods. Pine; white.

Practice

1. Drill holes for screws.

2. Countersink same.

3. Screw on upper and lower arms.

Sixth Week - Model No. 1, (Continued)

Theory (Ten Minutes)

Discussion of woods. Pine; red.

Practice

1. Bore hole for hanging purposes.

2. Chamfer outside ends.

3. Sandpaper model.

Seventh Week - Model No. 1, (Continued.)

Theory (Ten Minutes)

Discussion of woods. Pines.

Practice

1. Finish sandpapering model.

2. Shellac model.

Eighth Week - Model No. 2

Theory (Ten Minutes)

Discussion of woods. Gum; sweet.

Practice

1. Saw out stock and plane square to dimensions.

2. Draw outline of plan view.

Ninth Week - Model No. 2, (Continued)

Theory (Ten Minutes)

Discussion of woods. Gum; sour.

practice.

Saw outside at line using turning saw.

Tenth Week - Model No. 2, (Continued)

Theory (Ten Minutes)

Discussion of woods. Sycamore.

Practice

1. Cut with spokeshave to line.

2. Draw outline at front elevation.

Eleventh Week - Model No. 2, (Continued)

Practice

1. Saw outside of line, using turning saw.

2. Cut to line, using spokeshave.

Twelfth Week - Model No. 2, (Continued)

Practice

1. Round edges, using spokeshave.

2. Sandpaper model.

3. Screw in hook.

4. Shellac.

Thirteenth Week - Model No. 3

Practice

Plane stock square and true to dimensions.

Fourteenth Week - Model No. 3, (Continued)

Practice

1. Draw outline, using knife and gauge lines for corners.

2. Saw out corners, using hacksaw.

3. Cut with chisel.

4. File to lines.

Fifteenth Week - Model No. 3, (Continued)

Practice

1. Bore hole with expansion bit.

2. Smooth model, using plane, file, and sandpaper.

Sixteenth Week - Model No. 4

Practice

1. Saw out stock.

2. Plane stock for sides square and true to dimensions.

Seventeenth Week - Model No. 4, (Continued)

Practice

1. Plane stock for ends square and true to dimensions. 2. Draw outline of handle.

Eighteenth Week - Model No. 4, (Continued)

Theory (Ten Minutes)

Rotten stone. How obtained, used, etc.

Practice

1. Cut handle to dimensions.

2. Sandpaper sides, ends, and handle.

3. Nail together.

Nineteenth Week - Model No. 4, (Continued)

Practice

1. Fit bottom to box.

2. Nail on sides. Shellac and polish same.

3. Set nails with nail set.

Twentieth Week - Model No. 4, (Continued)

Practice

1. Sandpaper model.

2. Stain, shellac and polish.

Twenty-First Week - Model No. 5

Practice

1. Saw out stock for model.

2. Plane stock square and true to dimensions.

Twenty-Second Week - Model No. 5, (Continued)

Theory (Ten Minutes)

Dowel joints.

Practice

1. Joint stock.

2. Fit together, using dowels.

Twenty-Third Week - Model No. 5, (Continued)

Practice

1. Finish jointing stock.

2. Glue together, using iron clamps.

Twenty-Fourth Week - Model No. 5, (Continued)

Practice

1. Draw curves cut to outside of line.

2. Cut to line using spokeshave.

3. Round edges.

4. Sandpaper.

Twenty-Fifth Week - Model No. 6

Practice

Saw out stock for model.

Twenty-Sixth Week - Model No. 6, (Continued)

Practice

Plane stock square and true to dimensions.