Steps

Tools

Order Of Exercise

1. Mortise and tenon joints

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Turning saw and round file

2. Lay out and cut mortises in legs.

2. Curve sawing

3. 1-2 inch bit

3. Lay out and cut tenons in braces.

3. Sandpapering

4. Bit gauge and bit stock

4. Cut curve on upper brace.

5. Marking gauge and try-square

5. Sandpaper and fit together.

6. Block and Jack plane

6. Glue, stain, and finish.