Steps

Tools

Order Of Exercise

1. Compass sawing

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Fitting square joints

2. Compass saw

2. Brad sides to front and back.

3. Nailing and nail setting

3. Bradawl and hammer

3. Nail on bottom board.

4. 3-4 inch bit and bit stock

4. Place and nail centre boards.

4. Boring

5. Try-square and marking gauge

5. Set all brads.

6. Block and Jack plane

6. Finish with smoothing plane and scraper.

7. 1} inch No. 14 brads

7. Sandpaper and shellac.