Steps

Tools

Order Of Exercise

1. Boring to certain depth

1. Pencil, rule, knife and dividers

1. Square and true stock.

2. Use of bit gauge

2. Draw outline, centre lines etc.

3. Filing round corners

2. 1-8. 3-8. 1-2. 5-8. 3-4 and 1 inch bits.

3. Cut corner, using backsaw.

4. Bore holes indicated.

3. Bit gauge, and bit stock

5. Sandpaper and finish.

4. Turning saw and file

6. Shellac.

5. Try-square and marking gauge

6. 3-16 inch drill

7. Block and Jack plane