Steps

Tools

Order Of Exercise

1. Countersinking

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Screwing

2. Chamfer back and bevel front slats.

3. Gluing

2. Countersink and 1-16 inch drill

4. Beveling

3. Sandpaper stock, glue, and screw on slats to sides.

5. Clamping

3. Screw driver and bit stock

4. Hand clamp

4. Glue on holder to base, sandpaper and shellac.

5. 1 3/4 inch No. 12 screws

6. 1-inch No. 10 R. H. B. screws

7. Marking gauge and try-square

8. Block and Jack plane