Fig. 65.

White Pine, 7/8 inch.

Directions

Prepare wood 4 1/2 x 1 1/4 inches.

1. See 1 in Model No. 12.

2. Construct on the two narrow sides according to drawing.

3. Draw centre line and arcs. Draw on both sides at thick end.

4. Notch and whittle the thin part of button.

5. Whittle the curved ends and bore hole from both sides.

6. Make the under part of thin end a little curved to avoid friction (see cross section).

7. Sandpaper.

(This button may be used for a door with a moulding.)