Fig. 45.

White Pine. 1/2 inch.

Directions

1. Prepare wood 11 1/2 x 3 1/2 inches.

2. Plane one side straight.

3. Draw centre line parallel to planed side.

4. Divide distances of length and square lines across.

5. Measure and mark distances of width and connect points with a free-hand curve.

6. Draw arc at end with compass.

7. Cut to lines with turning saw and finish with spoke-shave and knife.

8. Make keel and rudder according to drawing.

9. Fasten keel and rudder with screws.

10. Prepare lead for keel and fasten with screws.

11. Use 3/16 - inch maple dowel for mast, boom, and gaff.

12. Make sail and rig according to drawing.

13. Try boat in bath-tub to see if it balances.

Note: If children have the requisite skill, use thicker wood for hull and hollow it out with gouge and shape it outside with spoke-shave. Various sizes mav be made.