V. - Portion of a Carved Oak Panel - The Sheepfold.

Plate V

Portion of a Carved Oak Panel. The Sheepfold. The other part is shown in Plate VI, as, owing to the proportion of this panel and the necessity for keeping the scale of the plates as large as possible, it has been divided and shown in two portions. It was begun without any premeditated intention as to use, the sloping end being the shape of the board as it came into the author's hands, the other end being sloped off to match it.

X. - Book Cover Carved in English Oak - "Reynard the Fox. (only carved portions shown.)

Plate X

Book-Covers carved in English Oak. These were done by the author for Mr. F. S. Ellis's translation of Reynard the Fox. The size of the carved part is 8-3/4 x 5-1/4 ins.

XIV. - Two designs for Carving, by Philip Webb. One executed, one in drawing.

Plate XIV

Designs for Carving, by Philip Webb. This plate gives two examples of designs for carving by Philip Webb. The upper one is part of a richly carved cornice which was done for a chimney-piece; the carving was executed by Mr. Laurence Turner, from whom the author got his first lesson in wood-carving. The other example is a design on paper for carving to be done in oak. This was carried out in the paneling of the dining-room at Clouds House, Salisbury, and looked exceedingly effective. Much of the articulation on the surface of the leaves, it will be noticed, is got by sharp facets produced by the intersection of gouge cuts.

XV. - Leg of a Settle, carved in English Oak.

Plate XV

Leg of a Settle carved in English Oak. This was begun by the author as forming part of a large oak seat or "settle," but has never been completed. The wood out of which it is carved came out of an old house at Tewkesbury and was full of cracks which were filled up with slips of oak glued in and carved over.

XVI. - Pew Ends in Carved Oak - Brent Church, Somersetshire.

Plate XVI

Pew Ends in Carved Oak, Brent Church, Somersetshire. The three bench ends shown in this plate are from Brent Church, Somersetshire. Although rude in execution, they are extremely effective in design. The bounding form of the molded edges and gracefully shaped top are worth noticing; the whole evidently the outcome of a nice and inherited sense of design, without any particular technical knowledge or experience. The termination of the finials was unfortunately omitted in the photograph, hence the abrupt line at the top.