Cost Of Door In Place. Size, 2 Ft. 8 In. X 6 Ft. 8 In

l 3/8 in. thick, 5-panel, double face, flat-paneled, and stuck- or solid-molded door, delivered.........................

$2. .00

Fitting hinges and lock, hanging and trimming............

.50

Butts, 1 pair 4" X 4" lacquered steel...............................

.40

Mortise lock, brass face and strike, wood knob, bronze escutcheons..................................................................

.80

Cost in place.............................

$3.70

A fair workman can hang, trim, and put hardware on, including mortise locks, about 6 ordinary doors per day. For veneered doors, or those requiring extra care, not more than 3 can be put in place.

Window Frames

The following estimate gives approximately the cost of a window frame of the size mentioned:

Cost Of Window Frame In Place. Size. 2 Lights, 28 In. X 28 In

Jambs 12 ft., head jamb 3 1/2 ft., total 15 1/2 ft.; 15 1/2 ft. X 1 1/8 in(1 1/4) X 5 in., at 1 cent per sq. in. per ft., less 50 per cent.........................................................

$0.48

Sill, 3 1/2 ft. X 1 1/8 in. X 5 3/4 in., same rate...............................

.13

Subsill, 4 ft. X 1 7/8 in. X 4 in., same rate............................

.16

Blind stop, 15 1/2 ft. X 7/8 in. X 2 in......................................

15

Parting strip, 14 1/2 ft. X 1/2 in. X 1 in....................................

.04

Outside casing, 11 1/2 ft. X 1 1/8 in. X 5 in.............................

.36

Head jambs, 4 ft. X 1 1/8 in. X 7 in.......................................

.17

Cap, 4 ft. X l 1/8 in. X 3 in....................................................

.08

Molding, 4 1/2 ft. of 1 1/2" ........................................................

.03

Sill nosing, 4 ft. X 1 1/8 in. x 4 in.......................................

.10

Apron, 4 ft. x 7/8 in. X 5 in.................................................

.10

Cove molding, 4 ft. of 7/8" .................................................

.02

Casing, 16 1/2 ft. X 7/8 in. X 5 in.............................................

.41

Back band, 16 1/2 ft. X 1 1/8 in. X 1 1/8 in....................................

.12

Sash stop, 14 1/2 ft. X 1/2 in. X 1 1/2 in.......................................

.05

Labor for frame complete, with outside casing attached at mill, and for setting inside casing at building..........

1.00

Total cost...........................................................................

$3.40