This section is from the book "Amateur Work Magazine Vol4". Also available from Amazon: Amateur Work.
That the readers of this magazine are interested in the forthcoming description of a small, easily constructed runabout, is abundantly shown by the large number of letters we have received in response to the editorial inquiry in the January issue. We are, therefore, having a description of such a vehicle prepared, and the first chapter will undoubtedly be published in the March issue of this magazine. We are able to state at this time that the design will be one which will admit of construction with a minimum tool outfit; in addition, the machine work will be reduced to the least possible amount. In this connection we shall endeavor to give information which will enable those building the vehicle to obtain the various parts at the lowest possible cost, and have been successful in locating quite a stock of such parts, which will be offered to readers of this magazine at exceptionally low prices. This description will be, therefore, of more than ordinary value, as it will enable many of our readers to gratify their desire to be included in the ranks of automobile owners.
We anticipate that the number who will be in-interested in this description will be large, as there are many machinists working in shops where the tool equipment could be utilized during spare time for the necessary machine work, as well as an equally large number of advanced pupils in Manual Training Schools who are also fortunate in having the necessary tool equipment at their command. Both of these classes will find the work of constructing this car easily within their capacity, and we shall anticipate the pleasure of hearing from the makers of the "Amateur" automobile as the description proceeds. Special attention will be given to answering the inquiries of any one finding it necessary to make them.
It will be noted that this number appears in a' uniform dress of type. The change to the smaller size throughout the whole of the magazine enables us to present the equivalent of about three additional pages of reading matter, which we are confident will be appreciated by our readers.
A new alloy of aluminum which is claimed to have special qualities has been produced in Germany. It is known as zimalium. The alloy is formed by adding small quantities of manganese and zinc to aluminum infusion. It is harder than pure aluminum and takes the tool better. A sheet of the metal shows a traction resistance of twenty-live to thirty-five kilos per square millimetre, which is double that of aluminum. The wire has a resistance of thirty to thirty-seven kilos per square millimetre and an elongation of ten per cent. In some respects it acts like brass wire. The cast metal is easily filed, forged and drilled. The alloy has a lower conductivity than the pure metal, but its price is ten to twelve per cent less.
A new electric furnace method has been invented by a Frenchman, M. A. Nodon. The electro-negative metal is fused and used as a cathode in an electric furnace with a non-attackable substance, as an anode and an electrolyte of a fusible, only slightly volatile, halogen compound of the more electro-positive metal. When a current is passed through, the ionization produces a combination of the metals with liberation of the halogen. Other metals can be incorporated, the precautions necessary and the factors controlling the proportions required being described.
 
Continue to: