Requirements

Body. 1 Condensed-milk Box (about 7 1/4 in. deep, 13 in. wide, 19 3/4 in. long).

Hardware. Picture wife and hooks.

Construction

Make body of the rack the same as described for the Small Wall Rack, Illustration No. 21.

Bore two rows of holes 3/4 inch in diameter, spaced about 2 inches from center to center. The center of the front row of holes is 3/4 inch and the center of the second row 2 1/2 inches back from the front edge of the rack. Cut slots 14 inch wide from the front edge to the front row of holes.

About half-way between the rear row of holes and the back of the rack, gouge out the top of each end of the rack to fit the handle of the rolling-pin. Hang with picture hooks and wire, or nail to the wall, as desired.