Next take your camera into your dark-room and develop the plate, that is, immerse it in a chemical solution called a developer to bring the picture out on it. To do this you must get a tray and put the exposed dry-plate in it, film side up, and pour the developer over it.

Fig 56c. The Pin-Hole Camera Complete With Cloth And Rubber Band

Rock the tray after you have poured the developer over the plate to keep the solution flowing forth and back evenly over it all the time. When you see the image very plainly take the plate out of the developer, wash it in clean water and then lay it with the film side up in a tray containing the fixing bath.

Let the negative - when the plate is exposed and developed it is called a negative - remain in the fixing bath until all the white parts, that is, the free silver which was not affected by the light, have disappeared and then let a gentle stream of water run on it for an hour or wash it in 16 changes of clean water. Stand it in a negative rack over night to dry and then you can make prints from it.