This section is from the book "Our Workshop", by Anonymous. Also available from Amazon: Our Workshop.
WHEN a young fellow enters a carpenter's shop as an apprentice his master will give him plenty of hard initiatory work, which may seem useless and irksome. He will be required to rip long pieces of scantling for hours together, and will be kept at this kind of work until he can saw tolerably straight. Perhaps, by way of change, he may be allowed to "rough plane" some boards for coarse works, in which little accuracy is needed.
If the apprentice be careful and work hard, he will soon be relieved of the first drudgery, and be employed on a better class of work. Before he is intrusted with anything important he must assist one of the journeymen, and if he prove intelligent and painstaking, he will soon become a skilled workman.
Thus step by step, beginning at the lowest round of the ladder, must mount all who would achieve real success in any undertaking. One step must be fully mastered before the next is attempted, otherwise much that would have proved of great value remains undiscovered.
Amateurs are rarely good workmen, because they seldom practise sawing and planing sufficiently to become expert.
Many people imagine that complete command of the saw and the plane may be acquired by repairing a piece of furniture, making a box, and similar odd jobs, which, though useful in their way, can afford but little scope for advancement in the joiner's craft.
The amateur joiner has only a narrow field for practice, and unless he make a bold stroke, and combine cabinet-making, his tools will often contract the rust of idleness.
A friend of the author has proved himself a clever amateur cabinet-maker, and can show several pieces of furniture which are exceedingly creditable specimens of art; and one article - a sideboard - deserves special mention, being a handsome and well - finished sample of good workmanship.
We only mention this circumstance to show that amateurs may, if they persevere, become skilled mechanics. That "practice makes perfect" is only true of thoughtful practice. Many men are engaged all their lives at one class of work, and yet never excel. Surely this cannot be for want, of practice; no, it is reflection in which they are deficient. The intelligent and thoughtful man feels a pleasure in his work, and is always striving to raise his art to still higher perfection by improving the means at his command, and by endeavouring to devise better and quicker ways of doing the work.
If the plank be required for work in which great accuracy is essential, it will be necessary to be particularly careful when planing the second side to make it exactly parallel to the first; otherwise the plank will not be of uniform thickness throughout. The eye of a skilled workman may be sufficiently "true" or "straight" to enable him to plane up a small piece of stuff without the assistance of a line or other artificial guide. A beginner, however, must not attempt to work in this way, or he will invariably spoil whatever he undertakes. Next to the square, the marking-gauge is the workman's best safeguard; the straight-edge should also be at hand, its aid being indispensable for testing the truth of extensive flat surfaces, as well as long narrow ones.
After the rough outside of the plank has been removed, the surface should be "tried up," or generally planed over with the trying-plane, to make it tolerably flat. If the longitudinal edges of the plank be very uneven, they must also be "roughly shot." The marking-gauge must be adjusted to the thickness to which the work is to be planed. If the wood will "hold up," say to one inch thick, the head of the gauge must be set back one inch from the scoring point. The plank must be raised and supported on one edge, the head of the gauge being forcibly applied to, and moved along, the true surface, while the scoring point leaves a clear line on the uppermost edge, and as much below the rough untouched surface as the substance of the work now exceeds the finished thickness to which the gauge is set. Both the longitudinal edges must be gauged, and the ends also, if they be tolerably straight and smooth. If the second side be now carefully planed down to the lines, we shall have a plank of uniform thickness. While planing the last side, the straight-edge must be frequently applied across the work to give us timely notice, if we be removing too much in the centre. It is a safe plan to plane down the surface near the edges to within a little of the gauge-lines, and then to remove the stuff towards the centre, remembering to use the straight edge frequently in the cross direction, and also occasionally lengthwise. When the second side has been made as true as the first, and the thickness is found to be uniform, the edges and the ends must be completed as before explained.
The process is somewhat different for thick works. After the first side has been "tried up," one of the edges is planed at right angles to it, the truth being tested by the square, the stock of which is applied to the first side, and the blade to the edge. Great care must be taken to make the edge or right-angled side - as it may be considered in thick work - exactly square to the first, as these two surfaces are required to serve as the foundations from which the remaining sides are to be wrought. The gauge must now be set to the finished thickness or the distance which is to exist between the first side and the one opposite or parallel to it.
The first side, which we will call A, and the adjacent edge or right-angled side, B, should be marked by a pencil line extending from one to the other, that we may distinguish them from the two remaining surfaces, C and D, which are to be wrought from them. The second side, C, when planed to within a little of the gauge-lines, may be tested by the square, the stock resting on the edge, B, and the blade on C. The square must be applied at short intervals as the work approaches towards completion, and should be moved over the entire surface, as some parts may be out of square, though closely bordering on others which are true.
 
Continue to: