Fig. 37.

Whitewood. 5/8 and 7/8 inch, 5/8-inch dowel.

New Tools

Countersink.

Directions

See 1, 3, and 4 in Model No. 6.

1. If a bevel is desired, draw lines and plane.

2. Locate holes for screws and for dowel.

3. Bore with centre bit and drill bit.

4. Countersink holes for screws, sandpaper, and fasten cleats to board across the grain of the wood.

5. Fit and glue dowel.

Note: The rings may be made of rope, rattan, or wire wound with raffia, or bought ready for use.