Fig. 48.

Whitewood. 3/8 and 1/4 inch.

Directions

1. Make the two uprights in one length, plane narrow sides.

2. Mark length, saw, and plane.

3. Make the two side pieces in one width, plane narrow sides and ends, mark width, cut apart, and plane.

4. Construct shape of uprights and sides according to drawing.

5. Finish top of uprights, using 1-inch centre bit at round corners.

6. Construct feet and heart-shaped holes. (See Chair 4, 5, 6, and 7.)

7. Mark out the strips for the bottom and the cleats in one piece 15 x 4 x 1/4 inch.

8. Mark and cut pieces to proper dimensions.

9. Sandpaper and- fasten parts together.