Model No. 12. - Lemon Squeezer.

Have the pupil cut from a 1 3-8" plank an oblong 21" x 2 3-4". Prepare from this two oblongs 1 5-16" x 2 9-16" x 10 1-8" using smoothing-plane on ends. Draw the plan upon opposite sides of wood, and with the tenon and turning-saws cut within 1-16" of the line. Cut up to line with chisel, gouge and tile. Make free hand drawing of handle upon opposite sides of the handle. Cut within 1-16" of lines with turning-saw. Cut up to lines with chisel, gouge, and tile. Model handle with knife and spoke-shave. Draw the oblique lines according to plan, and cut to lines with smoothing plane. Hollow out with gouge; bore holes with pin-bit.

Cut from a 7-8" board a piece 2" square. Draw a 1 3-4" circle upon one of the sides. Cut around circle with chisel, making a cylinder. Fasten cylinder to a piece of 1-2" board in the vice and with chisel model a hemisphere. Fasten this hemisphere in place by means of glue and a 1-4" dowel. Bevel edges with plane and knife. Finish with sand-paper and join together with a hinge.