Full Size.

Model. No. 28. - Book Rack.

For end pieces prepare two oblongs 9-16" x 4 1-16" x 5 1-16". For pieces that are dove-tailed to end pieces prepare oblongs 9-16" x 2 3-4" x 5 1-16". Set off tongue for groove with marking-gauge; cut to lines with chisel.

Transfer drawing for dove-tail, marking over lines with point of knife, using the bevel-gauge. Cut around lines with tenon-saw: finish with chisel and knife.

Transfer drawing upon end pieces, cut around lines with turning-saw, cut to lines with chisel, gauge, and tile: cut to lines of dove-tail with knife, using bevel-gauge; cut around lines with tenon-saw; cut to lines with chisel and knife and fit to other pieces; glue joints, using mallet for driving together.

Finish with smoothing-plane and sand-paper. Prepare pieces for runs according to drawing; set off grooves with marking gauge: cut to lines with 1-8" chisel.

Prepare cross-pieces according to drawing; finish with sandpaper; glue and nail together, using 3-8" brads.