Model No. 43. - Cabinet.

Prepare base board, side pieces, upper shelf, and partition; do graving on side pieces; glue and screw together base board, side pieces, partition and upper shelf. Make and fit back. Glue and screw back in place.

Prepare pieces for doors; make half-lap joint for doors, using marking gauge, tenon-saw and 1" chisel.

Glue and clamp together half-lap joints; finish surfaces with smoothing-plane. Do rebating with l-4" chisel.

Make, fit, and glue panels in doors. Hang doors with hinges.

Fit locks; make and fit ornamental pieces above and below; glue and nail them in place. Finish with sand-paper.