The commercial wood for the Indian club, Plate IV, is maple. Oak works well, and so do most hard woods. For those who like something a little out of the ordinary, stock for a pair of clubs can be built up, using many combinations of woods, Fig. 31.

Plate IV.

The stock is 3 3/4"x3 3/4" xi9".

Fig. 31. Built Up Model.

Plate III.

Fig. 32.

(a) Rough to 3 9/16" in diameter, (b) cut to length, leaving a diameter of 1" at each end. Fig. 30 illustrates the method for locating the various diameters at the correct points, (c) Rough out the shape with a gouge, then (d) fit to the templet with a scraper, Fig. 32. The templet rests on each end of 1" diameter. Sandpaper and finish according to the wood used. (See Finishing, page 33.)