This section is from the book "Cassell's Cyclopaedia Of Mechanics", by Paul N. Hasluck. Also available from Amazon: Cassell's Cyclopaedia Of Mechanics.
One method of removing silver from plated articles needs the use of a cold bath. The objects are hung in a large vessel filled with a mixture of 10 parts of sulphuric acid, 66 B., and 10 parts of nitric acid at 40° B. The length of the immersion depends on the thickness of the coat of silver to be dissolved. The liquid when it does not contain water dissolves the silver without sensibly corroding copper and its alloys; therefore avoid introducing wet articles into it, and keep the liquid perfectly covered when not in use. The articles must be placed in the liquid so as not to touch each other, and in a vertical position, so that the silver salt will fall to the bottom. As the strength of the liquid diminishes, add nitric acid. This process is regular and certain, but slow, especially when much silver is to be removed. The second method needs a hot bath. Nearly fill an enamelled cast-iron pan with concentrated sulphuric acid and heat to a temperature of from 300° F. to 400" F. At the moment of using the bath, pinches of dry powdered saltpetre are thrown into it; hold the articles with copper tongs in the liquid and the silver will rapidly dissolve without the copper or its alloy being corroded sensibly. If the process proceeds rather slowly, add saltpetre.
All the silver has been dissolved when, after rinsing in water and dipping the articles into the cleaning acid, they do not present black or brown spots, but have the appearance of new metal. These two methods are not suitable for removing the silver from wrought- and cast-iron, zinc, or lead; in these cases it is preferable to employ an electrical method or a mechanical process. Old dissolving liquids become green after use; to recover the silver they are diluted with four or five times their volume of water, and then hydrochloric acid or common salt is added. The precipitation is complete when the settled liquor does not become turbid by a new addition of common salt or hydrochloric acid. The resulting chloride of silver is separated from the liquid either by decanting or by filtering, and is afterwards reduced to the metallic state by one of the usual methods.
 
Continue to: