This section is from the book "Amateur Work Magazine Vol3". Also available from Amazon: Amateur Work.
F. W. PUTNAM
The wood turning lathe is a most useful machine to the pattern maker in shaping to the required form many of the common types of patterns. The lathe adapted for pattern work should be strongly framed and steady, in order to withstand the vibration resulting from the high speed at which it is driven. It should be of good and durable workmanship, the parts requiring frequent adjustment being provided with the quickest and simplest means of accomplishing that end.

Fig. 13. Face Plate. Finish all over.
The operation of pattern turning for large patterns is carried on in a rather different manner from the ordinary work of the wood turner. The pattern maker does not ordinarily use a tool ground on both sides and held sidewise for finishing, as does the wood turner, but instead, employs a thick chisel ground on one side only, with which he scrapes the work by firmly holding the chisel flatwise on the rest. Pattern makers turn in this way because the work must be approximately round and of exact size, the finish being then of minor importance, and also because it is possible to produce this finish later by other means. In the case of a regular wood turner, the work many times does not require turning to exact dimensions, a smooth finish being usually of greater importance.
The pattern maker generally turns small work just as the regular wood turner would, with a skew chisel beveled on both sides. In the case of heavy work, especially when turning "built up" patterns, the work is frequently fastened securely in a lathe, and a sliding rest, similar to that employed in the metal working lathe, placed before it, the turning being done by means of tools held in the rest.
The patterns described in this chapter can all be turned on a lathe with a 6" swing, and, therefore, the amateur pattern maker will find that the 6" "Amateur Bench Lathe" offered as a premium by the publishers of "Amateur Work" will serve admirably for this work. I shall assume that the reader has carefully followed my series of articles on " Wood Turning for Amateurs," and has become familiar with the elementary principles of wood turning as applied to the various exercises described in that above series of articles, and shall confine myself to a few special directions for the turning of the following patterns.
 
Continue to: