Carrying a milk bottle by the rim is tiresome work for the fingers, so I constructed a handle, as shown in the sketch, from a piece of wire. The carrier can be easily placed in the pocket.

The part fitting under the rim of the bottle neck is bent to form two semicircles, one hooking permanently at A, while the other is hooked at B after it is sprung around the neck of the bottle. - Contributed by Lawrence B. Robbins, Harwich, Mass.

A Carrier Made of Wire to Quickly Attach on a Milk   Bottle Neck

Ill: A Carrier Made of Wire to Quickly Attach on a Milk - Bottle Neck