Requirements

The same as for the Window-seat (Illustration 81), with the addition of two boxes supported on legs, as follows:

Ell Seat. 1 Soap Box (about 8 3/4 in. deep, 15 1/2 in. wide, 20 1/2 in. long).

End Support. 1 Candle Box (about 10 3/4 in. deep, 12 1/2 in. wide, 16 in. long).

Legs. 8 Strips 3/8 in. thick, 1 3/8 in. wide, 18 1/4 in. long. 8 Strips 3/8 in. thick, 1 3/4 in. wide, 18 1/4 in. long.

Seat Cover. 1 Piece 3/4 in. thick, the width equal to the outside width of the ell seat box, and length equal to the outside length of the box.

Construction

Make two Flower- and Book-Stands, as described in Illustration 53, and provide slot opening in one to receive the seat; also provide a seat support as described for the Window-seat. Make the legs 18 1/4 inches long. Remove the covers. Nail a leg on the corner of each box, allowing them to project below the bottom, having their other ends even with the open top end. Make a cover for the box which is to form the ell portion of the seat, putting a cleat near each end on the under side. This box will form the short or ell portion of the seat and will stand at a right angle to the long portion of the seat, with one flower-stand at its outer end. The cover of the box will form the seat and will not be hinged. The end of the long seat will be supported by a box placed under it in the corner.