Half Size.

Model No. 18. - Dish Drainer.

For slats prepare from a 7-8" board an oblong 25-32" x 4" x 18 1-32". With marking gauge, beginning at one of the long edges, mark off 1-4" spaces upon top and bottom surfaces. Mark first space 1, third space 2, and fifth space 3 and so on across the board. Cut between these spaces with splitting-saw. Cut to lines with jack-plane making five slats. Finish with sand-paper.

For the rests, prepare from a 7-8" board three oblongs 25-32" x 1 5-32" x 4 25-32". Draw plan upon these pieces. Cut around lines with hack-saw. Cut to lines with knife and file. Finish with sand-paper. Nail together with 1" wire brads. Sink nails with nail-set. Level up top surface with smoothing-plane and finish with sandpaper.