Show the model. Bisect the right and left edges and join these points with a line. (Teach here the oblong.) Bisect the right and left edges of the front oblong, connect with the ruler these points, and along its edge in the oblong, place points one inch (1) from the right and left edges. Open the dividers one and one-fourth inches (1 1-4") and with these points as centers inscribe circles. Cut out the circles and upper oblong. Bend the right edge of the oblong over the left edge lapping one-half inch (1-2"). Sew these together forming a cylinder. Sew one circular piece to one end of the cylinder and use the other for a hanger.